AP 120+kt88 

 

 

 

Nuova la versione AP120 con ingresso phono: 

Dati tecnici Tubes 12AX7 2pcs Inputs Phono MM, CD, Aux1, Aux2 Outputs Pre-out1, Pre-out2 Sensitivity Phono: 15mV / 47k ohms at 1KHz Sensitivity line level: 150mV / 100k ohms Overload Phono: 750mV at 1kHz - line level: 5V Frequency response Phono: RIAA +/-1.5dB Frequency response line level: 10Hz-80kHz (+/-1dB) Signal to noise ratio >95dB (A weighted) Harmonic distortion <0.1% 20Hz-20kHz (line level inputs) Inner modulate distortion <0.2% (IHF A) Power supply 230V, 50/60Hz Absorption 50 VA Dimension (WxHxD) 430 x 110 x 365 mm Finish Gold Weight 6,5 kg 

 

680 euro 

 

E per chi ha scelto casse ad alta efficenza e quindi vuole e puo' optare per una soluzione completamente a valvole col pre AP120: 

 

Tubes KT88 4pcs Power output 2 x 50W rms / 11 ohm (20Hz-20kHz, 0.1% THD) Power output 2 x 50W rms / 8 ohm (20Hz-20kHz, 0.1% THD) Power output 2 x 50W rms / 4 ohm (20Hz-20kHz, 0.1% THD) Sensitivity 150mV / 47k ohms at 1KHz Overload 5V/47k ohms at 1KHz Frequency response 10Hz-20kHz +/- 0.6dB Signal to noise ratio >96dB (A weighted) Harmonic distortion <0.5% 20Hz-20kHz Inner modulate distortion <0.2% (IHF A) Power supply 230V, 50/60Hz Absorption 250 VA Dimension (WxHxW) 455 x 210 x 300 mm Finish Gold Weight 24 kg 

 

 

KT 88 :50w per canale.1500 euro:solo finale 

Foto in ambiente 

 

Ma la concorrenza del TAC88 e' spietata. 

 

 

Per diffusori sotto 90 db/w: 

Finale Mono da 150w.(1900 euro) 

 

Tubes used: 12AU7x1,6N1x1,EL34x6   

Power output:150W(R.M.S.)Frequency response:10Hz-100KHz (+-3dB)T.H.D.: 

1% (30Hz-20KHz)S/N:=90 dB(A weight)Output impedance:4O,8OPower voltage:220V 50HzPower consumption:250W 

Dimension:W680xD440xH350 mm Shipping dimension: W680xD440xH350 mm  Net weight: 22.5 kg Gross weight: 26 kg 

 

Qui si fa spietata la concorrenza del  TAC834 

 

Torna ai sistemi a valvole entry level 

 

Torna a Aeron